|
|
|
HOME FLOOR COATINGS - SEALERS CHEMICAL RESISTANT NOVOLAC PRODUCTS FLOOR INQUIRY FORM
F-101 EASE-A-CRETE
(Epoxy Flooring) Epoxy Floor Patch & Resurfacer
F-101 Ease-A-Crete is a 100% solids epoxy floor patch and resurfacing material that can be used in almost any area of industrial plants. Use to patch concrete floors in industrial plants subjected to heavy traffic. It forms a tremendous bond with the existing concrete. F-101 Ease-A-Crete when cured provides a tough wearing surface able to withstand shock, impact and abrasion and is chemical resistant to most acids, cleaners, solvents and corrosives.
ADVANTAGES
- No need to break out existing concrete floor.
- Low odor and low VOC formula. Meets
- No long shut down time. Area is ready for traffic overnight.
- Easy for your maintenance personnel to mix and apply small amounts. No need to mix entire unit at once.
- Feather edges perfectly.
- Withstands steel wheel traffic.
Order in Units:
Each Unit covers approximately 38 sq. ft. @1/8"
COLOR: Natural, Gray, Concrete Gray or Tile Red
|
PRICE |
$147.60 per unit |
If you would like to print only this product information "CLICK HERE"
F-104
F-104 Cool - Temp may be used to patch and resurface concrete floors in coolers and other unheated area's in cool weather. May be applied at temperatures down to 25 deg.. F.
ADVANTAGES
- No need to break out existing concrete floor.
- Low odor and low VOC formula. Meets
- No long shut down time. Area is ready for traffic in 10 to 12 hours.
- May be applied by your own maintenance personnel.
- Feather edges perfectly.
- Withstands steel wheel traffic.
Order in Units:
Each unit covers approximately 41 sq. ft. @1/8"
COLOR: Natural, Gray, Tile Red
|
PRICE |
$186.81 per unit |
If you would like to print only this product information "CLICK HERE"
F-105 COLD-TEMP (Epoxy Flooring) Freezer Floor Repair
F-105 Cold-Temp may be used to patch concrete floors in freezer's and other unheated area's at temperatures from 25 deg.. F. down to 0 deg.. F. without effecting cure time.
ADVANTAGES
- No need to break out existing concrete floor.
- Low odor and low VOC formula. Meets
- No long shut down time. Area is ready for traffic in 2 hours @ 0 deg.. F.
- May be applied by your own maintenance personnel.
- Feather edges perfectly.
- Withstands steel wheel traffic.
Order in Units:
Each unit covers approximately 12 sq. ft. per unit @1/8'
COLOR: Natural only
|
PRICE |
$100.16 per unit |
If you would like to print only this product information "CLICK HERE"
F-119 TROWEL EZ
(Self Leveling Epoxy Floor Patch and Resurfacer)
F-119 Trowel Ez is a self leveling epoxy floor patch and resurfacer for concrete floors in industrial plants. Use for repairing spalled and worn concrete floors subjected to heavy lift truck and steel wheel traffic. F-119 Trowel Ez uses a special blend of finely ground aggregates along with a 100% solids epoxy formula to form a tough, resilient floor surface, that is resistant to shock, abrasion and chemical resistance to most acids, cleaners, solvents and corrosives.
ADVANTAGES
- No need to break out existing concrete floor.
- Low odor and low VOC formula. Meets
- No long shut down time. Area is ready for traffic overnight.
- Easy for your maintenance personnel to mix and apply small amounts. No need to mix entire unit at once.
- Feather edges perfectly.
- Withstands steel wheel traffic.
Order in Units:
Each unit covers approximately 75 sq. ft. @1/16"
COLOR: Light Gray, Medium Gray, Tile Red, Beige or Off White (Recommended Primer - F-123)
|
PRICE |
$165.26 per unit |
If you would like to print only this product information "CLICK HERE"
F-110 LIQUA-PATCH Liquid Epoxy Floor Repair
F-110 Liqua-Patch is a self leveling 100% solids epoxy designed for patching small holes and cracks in industrial concrete floors. It is resistant to heavy industrial traffic, shock, abrasion and chemical resistant to most acids, cleaners, solvents and corrosives.
ADVANTAGES
- Ready for traffic overnight.
- Easy 1 to 1 ratio mixing. No need to mix entire unit at once.
- Fills small hair line cracks and small holes in concrete floors.
- May be applied by your own maintenance personnel.
Order in Units
Each unit covers approximately 90 sq. ft.
COLOR: Clear Amber
|
PRICE |
$106.52 per unit |
If you would like to print only this product information "CLICK HERE"
F-122 RESIL-LASTIC
(Epoxy Floor Patch & Resurfacer) Oil Saturated Floor Repair
F-122 Resil-Lastic is a unique 100% solids epoxy floor patch and resurfacer designed to repair hard to clean oil soaked floors in industrial plants. F-122 Resil-Lastic may be applied to concrete, wood, wood block, metal and asphalt surfaces. F-122 Resil-Lastic is very resilient and flexible and able to take temperature changes without breaking out. Withstands heavy lift truck and steel wheel traffic, impact, abrasion and is chemical resistant to most acids, cleaners, solvents and corrosives.
ADVANTAGES
- No need to tear out existing floor.
- Easy 1 to 1 mixing ratio. No need to mix entire unit at once.
- May be applied by your own maintenance personnel.
- Fast cure time. Return area to traffic after overnight cure.
- Feathers perfectly.
- Can be applied to hard to clean, oil saturated floors and still achieve a tremendous bond.
Order in Units:
Each unit covers approximately 50 sq. ft. @ 1/8"
COLOR: Black only
|
PRICE |
$167.22 per unit |
If you would like to print only this product information "CLICK HERE"
F-127
F-127 Fast Set is a fast setting 100% solids epoxy floor patch used when shut down time must be kept to a minimum. F-127 Fast Set is ready for traffic in as little as 4 to 6 hours. Use to patch concrete floors in industrial plants subjected to heavy traffic. It forms a tremendous bond with the existing concrete. When cured it forms a tough wearing surface able to withstand shock, impact and abrasion and is chemical resistant to most acids, cleaners, solvents and corrosives.
ADVANTAGES
- No need to break out existing concrete floor.
- Low odor and low VOC formula. Meets
- No long shut down time. Area is ready for traffic in approximately 4 to 6 hours.
- Easy for your maintenance personnel to mix and apply small amounts. No need to mix entire unit at once.
- Feather edges perfectly.
- Withstands steel wheel traffic, fork lift and other industrial traffic.
Order in Units:
Small Unit covers approximately 12 sq. ft. @1/8"
Full Unit covers approximately 47 sq. ft. @1/8"
COLOR: Natural, Concrete Gray or Tile Red
|
PRICE |
|
Small Unit............$97.50/ea. |
If you would like to print only this product information "CLICK HERE"
<!--[if !vml]-->
<!--[endif]-->F-128 EPOXY MORTAR
(Patch Kit & Resurfacer)
F-128 is a three component 100% solids epoxy mortar designed for applications where excellent wear characteristics and strength are required.
ADVANTAGES
- Recommended for heavy traffic areas, forklift traffic and steel wheel equipment production areas.
- Very High compression and flexural strength ratios.
- Use to fill holes or worn areas in concrete.
- No need to break out existing concrete floor.
- No primer or topcoat required, however F-128 can be top coated with many other epoxy coatings to match your existing floor.
Order in Units:
Each Unit covers approximately 43 sq. ft. @ 1/8”
COLOR: Natural, Light Gray, Red, Dark Gray
|
PRICE |
$157.68 per unit |
If you would like to print only this product information "CLICK HERE"
<!--[if !vml]--><!--[endif]-->
F-129
(Patch Kit & Resurfacer)
F-129 Food Processors Epoxy Mortar is a three component 100% solids epoxy mortar designed for applications where floors are subjected to repeated exposure to hot water cleanings.
Food Processors – USDA Approved for food processing facilities.
Ask a sales representative for details.
ADVANTAGES
- Resists thermal shock and repeated contact with hot water and steam.
- Recommended for heavy traffic areas where cold floors are repeatedly washed with hot water and cleaning chemicals, such as food processing plants.
- Ready for light foot traffic in 10-12 hours.
- Use to fill holes or worn areas in concrete, or where equipment has been removed from existing epoxy floors.
- No need to break out existing concrete floor. F-129 can be applied directly to concrete with no primer necessary.
- No topcoat required, however, F-129 can be top coated with our F-094 Epoxy Mortar Grout Coat to help seal the floor.
Order in Units:
Each Unit covers approximately 43 sq. ft. @ 1/8”
COLOR: Natural, Light Gray, Red, Dark Gray
|
PRICE |
$177.10 per unit |
If you would like to print only this product information "CLICK HERE"
F-140
F-140 Flex Joint is a 100% solids epoxy and urethane hybrid, flexible joint filler designed to fill expansion joints in industrial plants, airports, highways, bridges or any other area where a flexible joint filler is needed. It is recommended for joints ranging in size from 1/2" to 1 1/2" thickness. Easy 1:1 mix, then pour into joints.
Color: Medium Gray
Coverage per unit: Approximately 60 to 70 feet based on 1/2" X 1" joints.
|
PRICE |
$146.34/ea......2 gallon unit |
If you would like to print only this product information "CLICK HERE"
F-141
F-141 Flex Joint Vertical Seal is a 100% solids epoxy urethane hybrid product designed for use in vertical and overhead expansion joints. It is mixed to a paste material, then applied by putty knife or trowel. Remains flexible, non-sag and has excellent adhesion characteristics. F-141 will remain flexible at temperatures ranging from -40 degrees F to 200 degrees F.
Color: Gray
Approximate coverage per unit: 70 feet @ 1/2" to 1" joints.
|
PRICE |
$155.22/ea......2 gallon unit |
If you would like to print only this product information "CLICK HERE"
F-142
F-142 Low Modulus Fast Set Epoxy Gel is a two component 100% solids epoxy gel designed to repair cracks and shallow holes on both vertical and horizontal surfaces. Can be applied thicker on horizontal surfaces. Recommended for repairing cracks and defects to concrete or masonry surfaces. Due to it's fast set time it is ideal for making quick repairs. Easy 1 to 1 mix-in ratio.
Color: Clear Amber Semi-transparent
Approximate Coverage per unit: 1,228 Lineal Feet per gallon @ 1/8" x 1/8".
|
PRICE |
$191.10/ea...........2 gallon unit |
If you would like to print only this product information "CLICK HERE"
F-094 EPOXY MORTAR GROUT COAT
F-094 Epoxy Mortar Grout Coat is a two component 100% solids epoxy system designed for application where a low build epoxy is needed to seal the surface of a previously placed epoxy mortar overlay system without changing the existing texture of the mortar.
ADVANTAGES
- Recommended for top coating or sealing epoxy mortar troweled systems.
- This product has outstanding wear resistance and superb chemical resistance.
Order in Units:
Each Unit covers approximately 800 sq. ft. @ 6 mils
COLOR: White, Off White, Light Gray, Medium Gray, Tile Red, Beige
Other Colors available: Please call for pricing:
|
PRICE |
$299.40 per unit |
If you would like to print only this product information "CLICK HERE"
F-818 Epoxy Crack Filler
-818 is a two component 100% solids epoxy crack filler designed for shallow repair on either vertical or horizontal surfaces.
Food Processors – USDA Approved for food processing facilities.
Ask our sales representatives for details.
ADVANTAGES
- Use to repair small hairline cracks or larger cracks up to 1/2” wide.
- This product has a 1 to 1 mix ratio so you only mix what you need.
- May be applied by your own maintenance personnel.
- Can be used to fill small holes in concrete.
Order in Units:
Each Unit covers approximately 2,500 lineal feet @ 1/8” x 1/8”
COLOR: Gray when mixed.
|
PRICE |
$188.52 per unit |
If you would like to print only this product information "CLICK HERE"
HAVE A PROJECT YOU NEED ANSWERS FOR, FILL OUT OUR INQUIRY
NEED MORE INFORMATION? EMAIL US AT 
HOME FLOOR COATINGS - SEALERS CHEMICAL RESISTANT NOVOLAC PRODUCTS FLOOR INQUIRY FORM
Copyright 2012, Nor-Mar Enterprises of Jefferson, LLC. All rights reserved.